Dazzill'n Disney April

I hope you like my page designs for this month!

             

 

"You Make my Heart Sing" Pop-up Mini-album

This Saturday, April 13th, Karen will be teaching this pop-up mini-album class at Scrapp'n Savvy. There are some seats left if you're interested. The cost is $35 and includes all materials to make the project as shown.

Please bring the following items to class:

•Scissors
•Trimmer
•Tape runner or favorite adhesive for attaching paper to chipboard
•Big Bite or 1/4" chipboard hole punch (for punching the holes back - we can share)
•Crop-a-Dile (small hole for a jump ring - we can share)
•Craft Knife and Cutting Mat
•Red liner tacky tape (any size, but 1/4" will be the easiest)
•Glue dots
•Tiny Attacher stapler and staples
•Paper piercer
•Pop dots
•Two pairs of pliers (if you have them) to open and close a stiff jump ring
•White Sharpie or paint pen (if you have one) to highlight the photo wheel window frame. I will bring mine to share.

You can see more at Karen't Blog:  http://karenburniston.typepad.com/i_am_not_lefthanded/2013/04/class-you-make-my-heart-sing-pop-up-mini-album-.html

March Disney

I decided to do a Disney themed Mini-Album this month.  I totally love what I came up with using the Clear Scraps album. Some of the pages are chipboard and some are acrylic.  I hope you enjoy this as much as I did.

Still more!

All Star Smiles by Debra Hensley

Supplies:
12 x 12 Bazzill Night Mist base
9 x 11 ½ Bazzill Lucy's Crab Shack- polka dot bikini paper
11 ½ x ½ Bazzill Lucy's Crab Shack- polka dot bikini paper
7 x 11 Bazzill Firehearts cardstock
6” star cut from Bazzill Whirlpool
Bazzill Lucy's Crab Shack Twinkle pattern paper to cut word SMILE from and circle for inside tart tin
tart tin
orange and white twine
stickers
glitter pen
glittered and Copic colored stars

Layout:
Adhere the 9 x 11 ½ Polka Dot Bikini to the Night Mist base leaving ¼ inch border on top and sides. Adhere 7 x 11 Firehearts cardstock to Polka Dot Bikini leaving ¼ inch at top and sides. Adhere ½ x 11 ½ Polka Dot Bikini strip to bottom of page about ¼ up from the bottom edge to match the other borders. Freehand cut or use a template to make a 6” star from Whirlpool- making sure the center is wide enough for the tart tin to fit over.

Using a Cricut or other cutting machine set to 2 inches, cut the word SMILES in your desired font out of Twinkle paper.

To make Tart Tin embellishment:
Cut a circle from Twinkle to fit into the tart tin. Using white paint, cover over a portion on the bottom half to stamp your sentiment on. ONCE DRY Stamp sentiment in black Memento Ink towards the bottom of the circle. Adhere circle into tin. Using a crop-o-dile, punch two holes- 8 spaces apart- on edge of tin. Insert twine through holes and secure on back with adhesive. Tie two bows out of twine and add to tin where twine exits the holes. Adhere stars to twine in tin to create a banner.

Glittered Stars:
Cut 3 stars out of white card stock covered with Score tape. Remove release sheet and cover adhesive with Glitter and burnish until smooth. Using Copic markers colors B97, YG63, RV25, color each star around the edges and then using the Colorless Blender (0) drag the color down to fill in the star leaving a lighter look in the middle. Be careful not to work the glitter too much or you can dissolve the adhesive.

To complete layout:
Adhere tin to center of Whirlpool star and attach to layout on the left bottom area. Adhere pictures and memorabilia. Adhere the letter for SMILES to the bottom right area between the Polka Dot Bikini pieces. Tie 3 bows from twine and adhere to “l” in SMILES, and top corners of photo or memorabilia in the top right of the layout. Add pennant stickers to top, sides and bottom of layout. To complete, use a Stardust gelly pen or other glitter pen and draw stars on Firehearts cardstock.

Wind on my face by Margene

 

1. Use Bazzill Whirlpool paper for the background of the layout.


2. Using the Bo Bunny bendable ruler, mark wavy shapes on French Vanilla, Cheddar and Beach word print paper from Lucy's Crab Shack collection, and cut and layer on bottom of whirlpool.

3.Using your cricut, cut bicycle out of bicycle print paper from Lucy's Crab Shack collection, and accent pieces from Cheddar. Adhere to waves at center of layout.

4.Using your cricut, cut clouds out of french vanilla paper, ink edges with blue ink and space at top of whirlpool.

5.Cut two 4" x 6" mats from Two Scoops prickly pear paper, sand so dots show up and place on page.

6.Taking the 4" x 6" card with the bicycle on it, cut out the center section, mat with the Two Scoops prickly pear paper, and change the words on it with matching word sticker sheet, saying "wind on my face". Adhere to top right of page.

7. Taking the top and bottom pieces from the 4" x 6" card with the bicycle on it. use end strips on the bottom of the page on both sides as decoration under cricut cut bicycle wheels.

8.Using 2 flag stickers, 2 bicyle stickers and word Happy Happy sticker from Matching sticker sheet, adhere to left edge.

9.Add pictures and enjoy.

 

Karrie's Layout

Directions to come :)

More Sampler Layouts!!

Here are a few more Sampler Layouts.  I have to keep you in a tad bit of suspense :)

Cricut By Carol Layout

Paper/Brads used:
Twinkle, Polka Dot Bikini, Cruiser, Prickly Pear Two Scoops, Coordinating Pink, Blue, Red, Black, and Black Vinyl (optional) 10mm Leapfrog brad, 5mm Black brad. Happy Tag, word stickers

Cartridges Used:
April Showers
Cricut Craft Room Basics
Don Juan
Flower Shoppe
Home Accents

Instructions:

Use Blue coordinating Cardstock for base.

With Polka Dot Bikini paper cut a banner using the April shower cartridge, cut at 3.5”

Use Twinkle paper to cut scalloped mat using Cricut craft Room Basics, cut at7.5”. (cricut craft room basics is available free using the cricut craft room)

Using Cruiser paper cut flower of your choice from Flower Shoppe cartridge, cut one at 2.75”, one at 2”, and one at 1.75”

Using the Pink and red coordinating paper cut flowers of your choice from Flower Shoppe cartridge, cut one at 2.75”, one at 2”, and one at 1.75”

Then cut 2 small flowers using the polka dot bikini paper, using the same flower shoppe cartridge, cut at 1.5”.

If you do not have flower shoppe cartridge you may substitute any flower from a cartridge you may have.

Using Prickly Pear two scoops cut two leaves from the home décor cartridge. Cut one leaf then use Flip feature to cut second leaf. Cut at 2”

Use Don Juan or font cartridge of your choice to cut letters. I used Black vinyl but black cardstock works well to. Cut at 1”.

Ink edges of all die cuts with brown ink, Curl edges of banner and flowers. Layer flowers 2.75, 2, and 1.75 adhere with brad (10mm Leapfrog brad used for flowers) the 2 small polka dot bikini flowers will be single layer flower with brad center.

Place letters in center of banner, attach banner to top of page, use 5mm black brads in corners of banner. Place scalloped die cut centered below banner. Matt 5x7 photo with 5.25.7.25 red cardstock matt and 5.5x7.5 black cardstock matt. Place in center of scallop die cut. Arrange flowers and leaf in bottom corner. Cut top of happy tag and place word stickers over happy(optional) Place in bottom corner.

Lucy’s Crab Shack by Susan

1 each 12 x 12 Bazzill Card Stock Night Mist
1 each 11 x 11 Bazzill Card Stock Whirlpool
1 each 7 x 1-1/2 Bazzill Card Stock Fire Hearts
1 each 6 x 1-1/2 Bazzill Card Stock Fire Hearts
1 each 5-1/2 x 1 Bazzill Card Stock Intense Orange
1 each 6-1/2 x 1-1/2 Beach Towel Countdown
1 each 8 x 1-1/2 Prickly Pear
1 each 6-1/2 x 2 Beach Towel Countdown
4 each misc. Bazzill brad jackets
3 pieces of twine(1 piece 13 “ long) and (2 pieces 3” long)
2 each misc. white brads
1 each sticker (FUN) from Lucy’s Crab Shack line
1 each journal block
1 each “Tim Holtz” ticket
2 each misc. clips

Instructions

Use Night Mist card stock as background. Cut Whirlpool card stock to 11 x 11, and round the edges. Ink the edges.

Measure down from top of page about 2” and string the twine across the page, securing with the white brads. Cut all strips of paper into “flags”. Ink all the edges of the flags, and arrange, with your photos on the twine, securing in place with adhesive. Place 3 brad jackets at the top center of the page, and place the 4th brad jacket on the ticket. Wrap a piece of twine around the ticket, and the other piece tie a knot. Use the journaling block to fill in where it is needed, after your pictures are arranged. Place the “fun” sticker on the journaling block.

Enjoy!

Still waiting for a few pics and instructions but these should get you started!